| Product: | Zebra Designer |
|
|
| Category: | Label Design | ||
| Solution: | Label Setup | ||
| Action | Preview and Print a Label |
Product: Zebra Designer
Category: Label Design
Solution: Label Setup
Action: Preview and Print a Label
If you want to print a label, you can use the print preview to simulate a print output. The label preview shows the label on the screen.
Simulate printing 10 labels on the screen to check label layout and printing procedure.
1. Click on
icon in the Standard Toolbar or select the command Print in the File menu. The Print dialog box appears.
Print / print preview dialog box
2. Enter 10 for Label Quantity and click on the Preview button. ZebraDesigner closes the dialog box and simulate the production for 10 labels on the screen.
Note: You can select between the quantity of the labels and the quantity of the pages. The page can have one or more labels and the labels are arranged on the page in columns and rows. If you have eight labels on the page, the quantity of ten pages prints 80 labels.
When you are certain that the labels will be printed correctly and the preview shows the correct values, you can proceed to real printing.
To actually print the labels, do the following:
1. Click on the
The Print dialog box appears.
2. Enter 10 for the Label Quantity and click on the Print button.
Your printer will now print 10 labels.
BACK
Notice: Zebra Technologies Corporation makes no representations about the suitability of this documentation for any purpose. It is provided "as is", for your information only, without warranty of any kind, either expressed or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose and non-infringement.
Windows and Windows Terminal Server are registered
trademarks of Microsoft Corporation. Metaframe is a
registered trademark of Citrix Systems, Inc.
Zebra Technologies Corporation
(C) 2004 ZIH Corp. All rights reserved.
Last Updated 11/07/2005
